Country code
A country code is a short alphanumeric identification code for countries and dependent areas. Its primary use is in data processing and communications. Several identification systems have been developed.
The term country code frequently refers to ISO 3166-1 alpha-2, as well as the telephone country code, which is embodied in the E.164 recommendation by the International Telecommunication Union (ITU).
ISO 3166-1
The standard ISO 3166-1 defines short identification codes for most countries and dependent areas:
- ISO 3166-1 alpha-2: two-letter code
- ISO 3166-1 alpha-3: three-letter code
- ISO 3166-1 numeric: three-digit code
The two-letter codes are used as the basis for other codes and applications, for example,
- for ISO 4217 currency codes
- with deviations, for country code top-level domain names (ccTLDs) on the Internet: list of Internet TLDs.
Other applications are defined in ISO 3166-1 alpha-2.
ITU
Telephone country codes
In telecommunications, a country code, or international subscriber dialing (ISD) code, is a telephone number prefix used in international direct dialing (IDD) and for destination routing of telephone calls to a country other than the caller's. A country or region with an autonomous telephone administration must apply for membership in the International Telecommunication Union (ITU) to participate in the international public switched telephone network (PSTN). Today, country codes are defined by the ITU-T section of the ITU in standards E.123 and E.164.
Historically, country codes were first defined in 1960 by the International Telegraph and Telephone Consultative Committee (C.C.I.T.T) in Recommendation E.29 in the ITU Red Book as international codes for Europe, parts of western Asia, and some Mediterranean countries,[1]
In 1964, E.29 was expanded with a global code system based on world numbering zones. In the 1968 White Book, the definition of country codes was relegated to ITU Recommendation E.161.
Codes were typically allocated by landmass and then subdivided by the capacity of each network at the time. France, the United Kingdom, the USA and USSR obtained preferential numbers due to their dominance in telecommunications at the time whilst China was able to ensure that Taiwan was officially unlisted whilst being allocated the code "886".[2]
Country codes constitute the international telephone numbering plan, and are dialed only when calling a telephone number in another country. They are dialed before the national telephone number. International calls require at least one additional prefix to be dialing before the country code, to connect the call to international circuits, the international call prefix. When printing telephone numbers this is indicated by a plus-sign (+) in front of a complete international telephone number, per recommendation E164 by the ITU.
Other ITU codes
The ITU also maintains the following other country codes:
- The E.212 mobile country codes (MCC), for mobile/wireless phone addresses.
- The ITU prefix, the first few characters of call signs of radio and television stations (maritime, aeronautical, broadcasting, and other types) to identify their country of origin
- ITU prefix - amateur and experimental stations, specific prefixes for amateur and experimental radio use, so that operators can be identified by their country of origin. These prefixes are legally administered by the national entity to which prefix ranges are assigned.
- Maritime identification digits, to identify countries in maritime mobile radio transmissions.
- ITU letter codes, to identify ITU member-countries.
Other country codes
The developers of ISO 3166 intended that in time it would replace other coding systems.
Other general-purpose systems
- FIPS country codes: Federal Information Processing Standard (FIPS) 10-4 defined two-letter codes used by the U.S. government and in the CIA World Factbook. On September 2, 2008, FIPS 10-4 was one of ten standards withdrawn by NIST as a Federal Information Processing Standard.[3]
- GOST 7.67: country codes in Cyrillic from the GOST standards committee.
- NATO country codes: North Atlantic Treaty Organization (NATO) initially used two-letter codes largely borrowed from the FIPS 10-4 codes mentioned above. In 2003, the eighth edition of the Standardisation Agreement (STANAG) adopted the ISO 3166 three-letter codes with one exception (the code for Macedonia). With the ninth edition, NATO is transitioning to four- and six-letter codes based on ISO 3166 with a few exceptions and additions.
- The first-level of the Nomenclature of Territorial Units for Statistics of the European Union, mostly focusing on EU member states.
- UNDP country codes, used by the United Nations Development Programme (UNDP).
- World Area Codes, used by the Bureau of Transportation Statistics, part of the United States Department of Transportation.
Business
- GS1 country codes, defined by the nonprofit international organization GS1 for its Global Trade Item Number (GTIN) and other standards for barcodes and the corresponding issue company prefixes.
- WIPO ST.3, defined by World Intellectual Property Organization (WIPO) to identify both countries and regional intellectual property organizations.
Sport
- IOC country codes, defined by the International Olympic Committee (IOC) to identify member countries, specifically National Olympic Committees.
- FIFA country codes, to identify member and non-member countries of FIFA (Fédération Internationale de Football Association).
Transport
- International vehicle registration codes, under the 1949 Geneva Convention on Road Traffic and the 1968 Vienna Convention on Road Traffic to identify the country that issued a motor vehicle's vehicle registration plate.
- After the 2004 EU enlargement, the EU began instead using the ISO 3166-1 alpha-2 code for license plate codes, but with two modifications: EL for Greece (instead of GR) and (formerly) UK for United Kingdom (instead of GB)[1]
- Diplomatic license plates in the United States, issued by the U.S. State Department to accredited diplomats, include a two-letter country code to identify that representative's country.
- ICAO aircraft registration prefixes, defined by the International Civil Aviation Organization (ICAO) to identify an aircraft's country of registration.
- ICAO airport code prefixes, defined by the ICAO to identify an airport's country.
- UIC country codes, to identify members of the International Union of Railways (UIC).
Other specific-purpose codes
- Country code top-level domain (ccTLD), an Internet top-level domain. Originally defined by the Internet Assigned Numbers Authority (IANA), it was initially based on ISO 3166-1 alpha-2.
- World Meteorological Organization (WMO) maintains its own list of country codes in reporting meteorological observations.
Other codings
Country identities may be encoded in the following coding systems:
- The initial digits of International Standard Book Numbers (ISBN) are group identifiers for countries, areas, or language regions.
Lists of country codes by country
A - B - C - D–E - F - G - H–I - J–K - L - M - N - O–Q - R - S - T - U–Z
See also
- List of ISO 3166 country codes
- ISO 639 language codes
- Language code
- Numbering scheme
References
- ^ Recommendation E.29, C.C.I.T.T. IInd Plenary Assembly (1960, New Delhi), Red Book Volume IIbis, ITU, p.43 (September 1961)
- ^ "How were telephone dialling codes allocated to countries - eg 32 for Belgium, 33 for France, 44 for UK? | Notes and Queries | guardian.co.uk". www.theguardian.com. Retrieved 2024-09-06.
- ^ "Announcing Approval of the Withdrawal of Ten Federal Information Processing Standards (FIPS)". Federal Register. 73 (170): 51276. Sep 2, 2008. E8-20138.
External links
- Comparison of various systems
- Another comparison: "Country Codes". Statoids.
- A comparison with ISO, IFS and others with notes
- United Nations Region Codes